Operations Geologist

Position: Operations Geologist
Location: KualaLumpur, Malaysia
Commence: Jun2009
Duration: 3months
Optional: extension until project completion
Criteria:-

• Onsite and offsite petrophysical and geological data acquisition and reporting from the project wellsite
• manage real-time data links
• liase with PETRONAS and PCSB
• liase and supervise with wireline, mudlogging, LWD, coring and subcontractors
• offset well correlation
• compilation of Post-Drill Geological Reports and Composite Logs
• generation of well evaluation proposals and input into drilling programs
• Data management (collation, QA, evaluation, data logging, etc.)

Pipeline Engineer

Position: Pipeline Engineer
Location: KualaLumpur, Malaysia
Commence: Apr2009
Duration: 2years
Optional: extension or permanent
Criteria:

• 8-12years O&G pipeline Engineering
• good experience in design, fabrication and hook up
• Malaysian / Thai nationals only for quick mobilization
• Bachelor’s Degree in Civil or Mechanical Engineering
• 8years O&G design and installation of offshore pipelines
• knowledge of applicable codes, standards and specification related to pipeline design, manufacture and construction
• Experience in offshore installation of pipelines, risers, pipelines crossing, clad pipelines
• Experience with pipeline flow assurance will be useful
• General experience in offshore installation of fixed platforms will be required
• General understanding of platform design is required (process, structural, launcher, receivers, etc.)

Well Services Engineer

Position: Well Services Engineer
Location: Miri, Malaysia
Commence: Jul2009
Complete: Sep2009
Duration: 2.5months
Optional: 2weeks extension
Criteria:-

• High School Certificate, Diploma or degree
• 15years in O&G
• 10years as well services/intervention and testing supervisor
• 5years at offshore environment
• Familiar with slick line, well testing and Coiled Tubing (CTU) operations

Inspection and Survey Services

Services: Inspection and Survey Services
Location: Vietnam
Commence: 2009H2
Duration: On-call
Criteria:-

• Verification, Inspection, Testing and Certification services for oil & gas, chemical, mineral, consumer, trade & industrial sectors
• Survey of Vendors Equipment & Material
• Survey onshore / offshore during fabrication hook-up and commissioning
• Non Destructive Testing (NDT)
• Design Assessment
• Tank calibration services
• Asset Evaluation
• Equipment Inspections
• System Audits
• Environmental Impact Assessment (EIA)
• Expert Witness Services
• Failure Mode Effect & Criticality Analysis (FMECA)
• Project Risk Assessment
• Qualitative Risk Assessment (QRA)
• Environment
• Health & Safety
• Quality
• The industries and organizations work are for Oil and Gas Exploration and Production, Drilling, Refining, Petrochemical, Chemical, Mining, Transport, Maritime, Power, Utilities (Water, Gas and Electricity), Insurance and Government

Pipeline Engineer

Position: Pipeline Engineer

Location: Algiers, Algeria

Rotation: 3mth on and 2wk off

Commence: Immediate
Duration: 1 year

Gas Drilling Team

Position: Gas Drilling Team

• Drilling Supervisor
• Petroleum Engineer (Drilling & Completion)
• Petroleum Geologist
• Petroleum Engineer (Process)

Location: Dhaka, Bangladesh
Commence: 2009Q3
Complete: 2010
Duration: 6months
Criteria:-

• drilling two new gas wells
• installation & commissioning gas process plant
• Drilling & installation gas processing plant
• experience around Bangladesh region

Project HSE Manager

Position: Project HSE Manager
Location: KualaLumpur, Malaysia
Commence: 2009Q3
Duration: 1year
Criteria:-

• BS degree in Engineering or equivalent
• 15years international project in HSE
• Experience in facilities & drilling planning & execution, and
• production operations
• demonstrated strong technical competence
• knowledge of engineering & construction codes, standards safety practices
• work within diverse cultural and multi-company environment
• Demonstrated interpersonal / team-working / leadership skills
• Strong written and oral communication skills

Senior Mechanical Engineer - Static Equipment

Position: Senior Mechanical Engineer - Static Equipment
Location: KualaLumpur, Malaysia
Commence: 2009Q3
Duration: 1year
Criteria:-

• Bachelor of Science degree in Engineering
• 10years overseeing equipment packages
• Strong, technical/engineering skills in equipment packages
• O&G project experience of site and HUC work
• International project work and living
• Ability to motivate and manage contractor personnel from a position of influence
• ability to interface with ethnically and culturally diverse teams.
• organize priorities and resources to maintain progress and be cognizant of budget and schedule constraints.

Senior Project Engineer

Position: Senior Project Engineer
Location: KualaLumpur, Malaysia
Commence: 2009Q3
Duration: 1year
Criteria:-

• Bachelor Degree in Engineering
• 10+ years international O&G
• project engineering on large complex international projects.
• Understanding of contract development & implementation
• Knowledge of project management systems
• Good understanding of relevant codes and standards
• Good interpersonal communication skills, self motivated.

Drilling Team

Position: Drilling Team

• Drilling Supervisor
• Fluids Coordinator
• Completions Supervisor
• Marine Supervisor
• Materials Coordinator
• Mud Specialist

Location: Malaysia
Commence: Jul2009
Duration: 1year
Optional: extension until project completion
Criteria:-

• Valid Offshore & onshore safety courses
• Valid Sea survival
• Valid HUET
• Valid Firefighting

Structural Engineer

Position: Structural Engineer
Location: Kerteh, Malaysia
Commence: May2009
Duration: 1year
Criteria:-

• Plan and execute structural facilities
• Develop subordinate technical capability
• Evaluate solution on structural FIP
• Implement structural underwater inspection programme

Maintenance Engineer

Position: Maintenance Engineer
Location: Kerteh, Malaysia
Commence: May2009
Duration: 1year
Criteria:-

• Engineering degree
• 6years in O&G Plant Turnaround
• Below 55 years old

Civil Structural Inspector

Position: Civil Structural Inspector
Location: Bintulu, Malaysia
Commence: May2009
Complete: Dec2010
Duration: 20months
Criteria:-

• qualified by experience or certified by CSWIP, AWS, C&G, AWI
• 3years civil inspection in downstream plants CSWIP3.1
• worked in downstream O&G projects
• SPM / highschool level
• Below 55years old
• good working knowledge of civil pertaining to welding
• interprets radiographic, MPI, dye penetrant testing
• Valid NOSP / NPSP

Welding Inspector

Position: Welding Inspector
Location: Bintulu, Malaysia
Commence: May2009
Complete: Dec2010
Duration: 20months
Criteria:-

• qualified by experience or certified by CSWIP, AWS, C&G, AWI
• 3years welding inspection in fabrication / construction CSWIP3.1
• worked in O&G projects
• SPM / highschool level
• Below 55years old
• good working knowledge pertaining to welding, NDT, consumables
• valid NOSP / NPSP

Electrical Instrument Inspector

Position: Electrical Instrument Inspector
Location: Bintulu, Malaysia
Commence: May2009
Complete: Dec2010
Duration: 20months
Criteria:-

• Diploma in Electrical or Instrument
• Experience in offshore E&I installation, inspection and testing
• 3years in E&I systems
• worked in O&G projects
• SPM / highschool level
• Below 55years old
• Valid NOSP / NPSP

Mechanical Piping Inspector

Position: Mechanical Piping Inspector
Location: Bintulu, Malaysia
Commence: May2009
Complete: Dec2010
Duration: 20months
Criteria:-

• CSWIP3.1 or AWS
• Experience in mechanical & piping works
• 3years in O&G
• worked in O&G projects
• SPM / highschool level
• Below 55years old
• Valid NOSP / NPSP

Painting Coating Inspector

Position: Painting Coating Inspector
Location: Bintulu, Malaysia
Commence: May2009
Complete: Dec2010
Duration: 20months
Criteria:-

• IMM Level II or NACE
• Experience in painting inspection
• knowledge of painting procedures, application, specs, etc.
• 3years in O&G marine paint application
• worked in O&G projects
• SPM / highschool level
• Below 55years old
• Valid NOSP / NPSP

NDT Inspector

Position: NDT Inspector
Location: Bintulu, Malaysia
Commence: May2009
Complete: Dec2010
Duration: 20months
Criteria:-

• CSWIP3.4(RT) and 3.1(UT)/3.2(UT)/3.8(Nozzle)/3.9(Node)/ASNT II
• 3years NDT inspector / operator in O&G
• worked in O&G projects
• SPM / highschool level
• Below 55years old
• Valid NOSP / NPSP

HSE Inspector

Position: HSE Inspector
Location: Bintulu, Malaysia
Commence: May2009
Complete: Dec2010
Duration: 20months
Criteria:-

• Valid SHO from DOSH / NIOSH
• Experienced in HSE planning, execution, control in fab yard, plant, offshore
• 6years in O&G
• worked in O&G projects
• SPM / highschool level
• Below 55years old
• Valid NOSP / NPSP

Structural Engineer

Position: Structural Engineer
Location: Algiers, Algeria
Commence: May2009
Optional: extension until completion
Criteria:-

• 7 years in engineering and construction of onshore upstream O&G
• Experience in structural engineering and design activities
• Experience of structural onshore construction
• Knowledge of international codes and standards
• Knowledge of structural analysis software eg SACS
• Bachelor in civil / structural engineering
• Membership of international professional society
• Good understanding of spoken and written English
• Knowledge of French is desirable

Civil Engineer

Position: Civil Engineer
Location: Algiers, Algeria
Commence: May2009
Optional: extension until completion
Criteria:-

• 5 years in construction and installation of upstream O&G onshore / desert
• Experience in construction, testing of civil / infrastructural O&G facilities
• Knowledge of construction and installation processes and procedures, equipment, tools, materials
• Knowledge of inspection and investigation techniques
• Knowledge of international codes and standards
• skilled in AutoCAD
• Bachelor in engineering
• Chartered Membership of international professional society desirable
• Good understanding of spoken and written English
• Knowledge of French is desirable

Civil Supervisor

Position: Civil Supervisor
Location: Algiers, Algeria
Commence: May2009
Optional: extension until completion
Criteria:-

• 10 years in construction and installation of upstream O&G onshore / desert
• 3 years in supervisor position
• Knowledge of inspection and investigation techniques
• Knowledge of international codes and standards
• Bachelor in engineering
• Chartered Membership of international professional society desirable
• Good understanding of spoken and written English
• Knowledge of French is desirable

Facilities Supervisor

Position: Facilities Supervisor
Location: Algiers, Algeria
Commence: May2009
Optional: extension until completion
Criteria:-

• 15 years in construction and installation of upstream O&G onshore / desert
• 7 years in EPCI managerial position
• Experience in construction, installation, testing and commissioning of O&G facilities
• Knowledge of elements cost in construction and maintenance
• Knowledge of construction and installation processes and procedures, equipment, tools, materials
• Knowledge of inspection and investigation techniques
• Knowledge of international codes and standards
• skilled in AutoCAD
• Bachelor in engineering
• Chartered Membership of international professional society desirable
• Good understanding of spoken and written English
• Knowledge of French is desirable

QA/QC Supervisor

Position: QA/QC Supervisor
Location: Algiers, Algeria
Commence: May2009
Optional: extension until completion
Criteria:-

• 15 years relevant experience
• 7 years in QA/QC managerial position
• Worked in O&G onshore / offshore projects
• Detailed Knowledge of Qa/QC system
• Chartered Membership of international professional society desirable
• Good understanding of spoken and written English
• Knowledge of French is desirable

Senior Pipeline Engineer

Position: Senior Pipeline Engineer
Location: Algiers, Algeria
Commence: May2009
Optional: extension until completion
Criteria:-

• 10 years in engineering and construction of upstream O&G onshore / desert
• Experience in pipeline engineering and design
• Experience of pipeline onshore construction and operation
• Knowledge of international codes and standards
• Knowledge of pipeline simulation software ie Pipesim, OLGA
• Bachelor in engineering
• Chartered Membership of international professional society desirable
• Good understanding of spoken and written English
• Knowledge of French is desirable

Senior Piping Engineer

Position: Senior Piping Engineer
Location: Algiers, Algeria
Commence: May2009
Optional: extension until completion
Criteria:-

• 10 years in engineering and construction of upstream O&G onshore / desert
• Experience in piping engineering and design
• Experience of piping construction and installation
• Knowledge of international codes and standards ie ANSI, ASME, NACE, API, etc
• Knowledge of pipe stress analysis software
• Bachelor in engineering
• Chartered Membership of international professional society desirable
• Good understanding of spoken and written English
• Knowledge of French is desirable

Maintenance / Construction Planner

Position: Maintenance / Construction Planner
Location: Miri, Malaysia
Commence: Jul2009
Duration: 24months
Criteria:-

• Degree in Mechanical Engineering or equivalent
• 8 years experience in planning for maintenance / engineering for O&G
• 5 years site construction experience.
• 5 years experience in Project Management/ Surface/ Sub-surface/ Operations/ Reliability Integrity/ Maintenance.
• Able to write and communicate in both Bahasa Malaysia and English.
• 30-55 years old in 2009.
• Available upon notification.
• Malaysian citizen.

Line Trainer (Mechanical)

Position: Line Trainer (Mechanical)
Location: Miri, Malaysia
Commence: Jul2009
Duration: 24months
Criteria:-

• Degree or Higher Diploma with 7 years field experience
• OR Alternatively 15 years with lower academic qualifications.
• technically competent and proficient in English Language
• 8 years field experience in Oil and Gas Industries.
• 8 years experience in Project Management/ Surface/ Sub-surface/ Operations/ Reliability Integrity/ Maintenance.
• Able to write and communicate in both Bahasa Malaysia and English.
• about 40 years old in 2009.
• Available upon notification.
• A Malaysian citizen.

Line Trainer (Instrument)

Position: Line Trainer (Instrument)
Location: Miri, Malaysia
Commence: Jul2009
Duration: 24months
Criteria:-

• Degree or Higher Diploma with 7 years field experience
• OR Alternatively 15 years with lower academic qualifications.
• technically competent and proficient in English Language
• 8 years field experience in Oil and Gas Industries.
• 8 years experience in Project Management/ Surface/ Sub-surface/ Operations/ Reliability Integrity/ Maintenance.
• Able to write and communicate in both Bahasa Malaysia and English.
• about 40 years old in 2009.
• Available upon notification.
• A Malaysian citizen.

Company Site Representative (Construction)

Position: Company Site Representative (Construction)
Location: Miri, Malaysia
Commence: Jul2009
Duration: 24months
Criteria:-

• Degree or higher Diploma with 5 years field experience
• or 10 years with lower academic qualifications.
• 5 years field experience in O&G
• 5 years experience in Project Management/ Surface/ Subsurface/ Operations/ Reliability Integrity/ Maintenance.
• Able to write and communicate in both Bahasa Malaysia and English.
• 25 years old and above.
• Available upon notification.
• Malaysian citizen.

Business Planner

Position: Business Planner
Location: Miri, Malaysia
Commence: Jul2009
Duration: 24months
Criteria:-

• Degree, Business or equivalent
• 2 years O&G in Business Planning.
• knowledge and experience in Project management and able to prepare
• project schedule, business proposal, budget and manual write-up related to venting/ flaring reduction projects/ initiatives.
• strong business knowledge in O&G at understanding, developing and delivering key messages.
• Possess analytical mind with strong interpersonal skills and ability to provide good analysis based on available data.
• Able to lead and drive projects in gas management and manage various communications channel.
• Knowledgeable of Petroleum Economic (economic and financial indicators)
• Creative individual and a team player.
• Able to write and communicate in both Bahasa Malaysia and English.
• 24 years old and above.
• Available upon notification.
• Malaysian citizen.

Environment Executive

Position: Environment Executive
Location: KotaKinabalu, Malaysia
COmmence: May2009
Duration: 2years
Optional: 1year extension

Specialist Engineer

Position:-

• Barge Master
• Geotechnical Specialist
• Hydraulic Specialist
• Installation Specialist
• Marine Warranty Surveyor
• Naval Architect
• Oceanographer
• Specialist Mechanical Engineer
• Specialist Pipeline Engineer
• Specialist Structural Engineer
• Specialist Safety Risk & Reliability Engineer
• Specialist Structural Engineer

Location: Sarawak, Malaysia
Commence: May2009
Duration: Call-out basis
Criteria:-

• Engineering and Document Reviews
• Environmental Impact Assessment (EIA)
• Installation Attendance and Issue Cut Sea-Fastening Certificate
• Load-out Certificate
• Marine Warranty Surveyor Services
• Material testing, suitability and performance
• Mobilization Inspections and Load-out Attendance and Issue Premobilization Vessel Suitability Surveys
• Safety, risk and reliability studies, quality audits
• Sail Away Attendance and Issue Sail-Away Certificate
• Specialized engineering, construction and installation studies and analyses
• Verification/certification throughout all project phases

Instrumentation Control Trainer

Position: Instrumentation & Control Trainer
Location: PortHarcourt, Nigeria
Commence: Apr2009
Complete: Jun2009
Criteria:-

• Degree, certificate or HND in instrumentation for O&G
• 10 years experience in Instrumentation,
• 2 projects as trainer in discipline, including development of training material.
• experience on DCS, PLC and Plant Communications systems
• fully computer competent
• Having NVQ A1 or A2 (D32) is preferred
• training development of Instrument material and courses,
• Classroom Training starts on 27Apr2009 to 19Jun2009
• possess good social behaviour and adhere to guidelines
• have passion for training

Cost Controller

Position: Cost Controller
Location: Kashagan, Kazakhstan
Commence: May2009
Rotation: Resident basis
Duration: 1year
Optional: extension or permanent

Senior General Inspector

Position: Senior General Inspector
Location: Yetagun, Myanmar
Commence: May2009
Complete: Sep2009
Duration: 5months
Rotation: 28/28
Criteria:-

• Well Tie-in Services
• Diploma / High School Certificate
• Below 60 years old
• Valid Medical cert
• Valid HUET & Sea Survival cert
• experience and knowledge in many QAQC discipline
• Capable in protective coatings and construction materials / specification
• Able to substitute for QA Enginer when required
• Knowledge of radiographic, ultrasonic, magnetic, dye testing
• Certified in CSWIP 3.1 and/or 3.4
• 10 years in O&G
• Fluent in English
• Experience in HSE Standards & Procedures
• Computer literate

Planner

Position: Planner
Location: Kashagan, Kazakhstan
Commence: May2009
Rotation: Resident basis
Duration: 1year
Optional: extension or permanent

NDT Inspector

Position: NDT Inspector
Location: Yetagun, Myanmar
Commence: May2009
Complete: Sep2009
Duration: 5months
Rotation: 28/28
Criteria:-

• Well Tie-in Services
• High School Certificate
• Below 60 years old
• Valid Medical cert
• Valid HUET & Sea Survival cert
• Experience in radiographic, ultrasonic, magnetic, dye testing
• Certified with CSWIP 3.4RT and 3.1UT/3.2UT/3.8Nozzle/3.9Node/ASNT2
• 5 years in O&G
• Fluent in English
• Computer literate

General Inspector

Position: General Inspector
Location: Myanmar
Commence: ASAP
Complete: May2010
Criteria: Topside Structural Maintenance

Project Cost Controller

Position: Project Cost Controller
Location: KualaLumpur, Malaysia
Commence: May2009
Duration: 3years
Criteria:-

• Engineering Degree/Science or advanced diploma
• E&P background and knowledge in the Project activities
• 8years in O&G industry
• Effective skills in planning, rescheduling and cost estimating /control
• Project management and knowledge in O&G industry
• Strong analytical, negotiating and drive/initiatives
• 55 years and below
• Experienced in using project Management Software (Primavera software or Microsoft Project or PER MASTER etc)
• Experienced in Engineering or Construction phase.

QA/QC Project Inspector/Coordinator

Position: QA/QC Project Inspector/Coordinator
Location: Melaka, Malaysia
Commence: May2009
Duration: 12 months
Optional: extension till project completion
Criteria:-

• 15 years in O&G
• 15 years on contruction sites
• Refinery Revamp experience
• proven history in refining industry
• Qualifications in Quality Control field
• hydrocracker with a 200 bar 2" wall of alloy pipe.
• Bolt tension experience
• experience with hydraulic heavy wall welding and pre heat treatment
• 110km pipe to be installed

Mechanical Commissioning Engineer

Position: Mechanical Commissioning Engineer
Location: Miri, Malaysia
Commence: Apr2009
Duration: 2 years

Drilling Superintendent

Position: Drilling Superintendent
Location: Office based, Ashgabat, Turkmenistan
Commence: Immediate
Complete: 17 Nov 2009
Duration: 8 months with possible extension
Criteria:-

• 20 years diversified petroleum industry experience in drilling, workover and completion activities
• 15 years experience working on various drilling rigs.
• 5 years experience as Drilling Superintendent.
• Possesses IWCF certificate.
• sound knowledge of the scientific discipline of drilling engineering
• International Association of Drilling Contractors (IADC)’s broad guidelines and practices
• American Petroleum Institute (API)’s state-of-art broad references
• Various drilling rigs and vessels design, safety specifications and selection
• Well Planning – shallow gas / casing design
• Wellheads and tubular designs
• Drilling fluids program design
• Drill bits selection and performance
• Directional drilling planning / programming
• Wellbore trajectory planning / optimisation
• Directional surveying method / equipment / accuracy / required results
• Bottomhole assemblies and Downhole Measurement selection
• Hydraulics Program
• Well Control equipment / methods
• Well logging equipment / techniques
• Cementing equipment / pilot test / program designs
• Formation coring equipment / program
• Fishing tools
• Well Completion equipment
• Horizontal Drilling and Completion Technology
• Computer Operating System and engineering softwares
• knowledge in production testing, interpreting electric logs, mud logs and geology

Senior Drilling Supervisor

Position: Senior Drilling Supervisor
Location: New Zealand
Duration: 4 hitches (28/28)
Commence: May2009
Complete: Dec2009
Criteria:-

• Offshore
• Hydraulic Workover
• Well Interventions and Completions
• Side Track
• some drilling
• able to work in New Zealand without lengthy NZ Work Permit/Visa formality

Project Front End Engineer

Position: Project Front End Engineer
Location: Brunei
Duration: 24months
Commence: Apr2009
Criteria:-

• 10 years front end engineering experience during the early decision-making stage of projects.
• creative mind and an ability to think “outside the box”
• Experience with design of flow metering systems in O&G
• Good understanding of operability, maintainability and HSE constraints imposed on engineering designs.
• applying C2V value enhancing techniques
• Experience with working in a complex offshore infrastructure/brownfield environment is essential
• High level cost estimating experience
• Front End Development (opportunity assessment, front end loading, value improving practices).
• Offshore survival (tropical BOSIET).
• communicate across all interfacing departments including presentation skills.
• Good report writing skills.

Technical Personnel

Position: Technical Personnel
Position: Qatar
Commence: 2009H2
Criteria:-

• Mechanical Engineers
• Electrical Technicians
• Instrument Engineers
• etc

JackUp Rig

Services: JackUp Drilling Rig
Location: Yangon, Myanmar
Duration: 2-4 months
Commence: 2010/11
Criteria:-

• 200' x MS or IS type jackups
• 100-150 ft Sea Water Depth at drilling location
• drilling campaign for 2-4 exploration wells
• Oct2010 Spud date

Contract Engineer

Position: Contract Engineer
Duration: 1year
Optional: extension or permanent
Commence: ASAP
Location: Kazakhstan

Project HSE

Position: Project HSE
Location: KualaLumpur,Malaysia / Havana,Cuba
Duration: 1year
Optional: 1year extension
Commence: Apr2009
Criteria:-

• B.Sc in Engineering / Science with 5 years in O&G and Project HSE
• OR Diploma with 8 years O&G and Project HSE
• Registered Safety and Health Officer
• valid Offshore Passport
• Age of 53 years old and below
• experience in exploration & production
• knowledge on HSEMS, Risk Management and Emergency Response
• familiar and knowledge in HSE-MS
• Proficient in English language

Drilling Engineer

Position: Drilling Engineer
Location: Shekou, China
Commence: Apr2009
Duration: 1year
Optional: extension or permanent
Criteria:-

• Mandarin & English speaking
• onshore position

Well Services Site Operations Engineer

Position: Well Services Site Operations Engineer
Location: Brunei
Commence: Apr2009
Duration: 2years
Rotation: 28/28
Criteria:-

• Higher National Diploma in Engineering
• Graduate Degree in Engineering,
• Well Services / Well Engineering experience.
• DtL experience would be an advantage.
• 3 years as Well Services Engineer and/or Well Services Company Site Representative. valid IWCF certificate at supervisor level.
• 8 years Well Servicing experience
• experience in Managing Concurrent Production and Vessel / Asset Activities
• competency equivalent to SIEP Round I self-study exercises.

E&I Technician

Position: E&I Technician
Duration: 2-3 weeks,
Commence: 20Mar2009
Location: Miri, Malaysia
Criteria:-

• 3-4 years experience in related field within oil & gas industry
• Familiar with tubing, termination, cable pulling
• Possess offshore certificate (sea survival, safety training, EBS),
• valid offshore medical,
• offshore safety passport

Rotating Equipment Commissioning Engineer

Position: Rotating Equipment Commissioning Engineer
Location: Miri, Malaysia
Commence: ASAP
Duration: 24mths
Optional: 12mths extension
Criteria:-

• B.Sc. in Mechanical Engineering, with 12 years O&G
  
• or Diploma in Mechanical Engineering, with 18 years O&G facilities/plants pre-commissioning and commissioning.
• worked in offshore hookup and commissioning project
  
• working knowledge of offshore Oil & Gas safety standards.
• experience in installation, pre-commissioning, commissioning and startup experience of gas turbine compression system and power generators.
• familiar and hands on experience on turbo-machinery package and rotating equipment and associated systems pre-commissioning
  
• familiar with piping system pre-commissioning works, e.g. flushing / cleaning, hydrotesting, P&ID line walk, reinstatement leak test, etc.
• Experience with Project Completion Management systems such as WinPCS, etc.

Maintenance Engineer

Position: Maintenance Engineer
Location: Kerteh, Malaysia
Commence: Apr2009
Complete: Aug2009
Duration: 5months
Criteria:-

• Engineering degree
• 6years in O&G Plant Turnaround
• Below 55 years old